Real cold, real fast.

1-Person Capacity
• Down to -145°C
80 Sessions Per Day
• 120-Min. Pre-Cooling Time
Exterior Finish
Tailored to your design preferences.

SWIPE TO VIEW 180°

A single person unit that is a true powerhouse in its class. This cryo chamber has lightning fast cool down time and ultra low temperatures. True air temperature without boosters – the windchill effect comes from controlled airflow.

 

Features

Nitrogen-Free

Cooling

24" Touchscreen

Display Module

Two-Way

Communication

System

Safety Checklist

Session Countdown
Timer Visible from
Within The Chamber

Alexa for Music
Speaker Playback

Key Tech Specs

Real room temperature (down to)

-100°C

Windchill application temperature (down to)

-145°C

Cooling down time (approx.)

120 Minutes

Maximum sessions per day (up to)

80

Voltage

380–400 V | 3 | 50 Hz 
208 V | 3 | 60 Hz

Connected Load

32A

Client Success Story

“MECOTEC’s project team is very professional, and they are prompt in resolving technical problems on site. MECOTEC 1COOL has the following advantages: [1] it is easy to operate and very user-friendly; [2] has checkboxes to ensure safety and prep before patient steps into the cryo; [3] communication speaker allows for breathwork guidance; [4] internal timer in the cryo is useful for client; [5] it is nitrogen-free so it gives a more comfortable experience.”

Testimonial 1

BUILT FOR YOUR BUSINESS.

From planning and installation to training and support, we're here to help you every step of the way.

Frequently asked questions about the 1COOL

How cold does the 1COOL get?

The 1COOL reaches real room temperatures down to about -100 °C – true air temperature, without boosters – and, through controlled airflow, a windchill application temperature down to about -145 °C.

Does the 1COOL need liquid nitrogen?

No. The 1COOL is a fully electric, nitrogen-free cryotherapy chamber – you breathe normal air inside the chamber.

How many sessions per day can I run with the 1COOL?

The 1COOL supports up to 80 sessions per day, with a pre-cooling time of roughly 120 minutes after switch-on.

What power connection does the 1COOL need?

Typically 380–400 V, three-phase, 50 Hz (or 208 V, three-phase, 60 Hz) with a 32 A connected load. MECOTEC supports you with planning, installation and training.